Original Item: Only One Available. This is a very nice servie used all original example of a German WWII M40 helmet, issued to the Heer (Army). This stamped sheet steel construction helmet retains about 75% of its original lightly textured panzergrau (armored gray) paint, but does show some chipping, scratches, and rust, typical of a helmet that was used in the field. The left side of the helmet features a Heer eagle decal, which is retained about 75%, with damage from wear and use, with overall wear as well as some scratches that go all the way through the paint. It still has a lovely metallic sheen, and the shell overall has a great service worn look that is impossible to duplicate!
The reverse, interior, neck guard apron is batch number stamped 143, and the interior, left side, apron has a stamped manufacturer's code and size, Q66. This indicates it was manufactured by F.W. Quist G.m.b.H in Esslingen, Germany in size 66. This is a nice large size that can accommodate size 58cm and 59cm liners, or 7 1/4 - 7 3/8 US. Shells of this large size are harder to find, and more valuable to a collector.
All three liner retaining pins are intact, and still have some of the original paint, though they do not match the exterior paint. The interior of the helmet still has the original M31 leather liner with all eight of its fingers intact. The leather is worn, as to be expected, but is still supple with no tearing. There is a short piece of shoelace in place of the original top tie strap. It also should be noted that the liner is of the earliest pattern, with an aluminum liner band that does not have size reinforcements. We were not able to locate a maker marking, but it is marked 64 n.A. / 56, indicating a size 56 liner for a 64 shell, which is not correct for this shell. Most likely late in the war, they had to make do with what they had, and and older liner was refit with new "pigskin" leather, and fitted into the helmet. Definitely some great research potential here!
Overall a very nice 100% genuine M40 Single Decal Heer Army helmet, with a great service worn look! M40 helmets of this quality are always the hard to find on the market. This is an item that will only continue to appreciate in value over time.
The first "modern" steel helmets were introduced by the French army in early 1915 and were shortly followed by the British army later that year. With plans on the drawing board, experimental helmets in the field, ("Gaede" helmet), and some captured French and British helmets the German army began tests for their own steel helmet at the Kummersdorf Proving Grounds in November, and in the field in December 1915. An acceptable pattern was developed and approved and production began at Eisen-und Hüttenwerke, AG Thale/Harz, (Iron and Foundry Works), in the spring of 1916.
These first modern M16 helmets evolved into the M18 helmets by the end of WWI. The M16 and M18 helmets remained in usage through-out the Weimar Reichswehr, (National Defence Force, Circa 1919-1933), era and on into the early years of the Third Reich until the development of the smaller, lighter M35 style helmet in June 1935.
In 1934 tests began on an improved Stahlhelm, whose design was a development of World War I models. The Eisenhüttenwerke company of Thale carried out prototype design and testing, with Dr. Friedrich Schwerd once again taking a hand.
The new helmet was pressed from sheets of molybdenum steel in several stages. The size of the flared visor and skirt was reduced, and the large projecting lugs for the obsolete armor shield were eliminated. The ventilator holes were retained, but were set in smaller hollow rivets mounted to the helmet's shell. The edges of the shell were rolled over, creating a smooth edge along the helmet. Finally, a completely new leather suspension, or liner, was incorporated that greatly improved the helmet's safety, adjustability, and comfort for each wearer. These improvements made the new M1935 helmet lighter, more compact, and more comfortable to wear than the previous designs.
The Army's Supreme Command officially accepted the new helmet on June 25, 1935 and it was intended to replace all other helmets in service.
More than 1 million M1935 helmets were manufactured in the first two years after its introduction, and millions more were produced until 1940 when the basic design and production methods were changed, replacing the multi-piece riveted vent with one stamped directly into the steel. Later, in 1942 the rolled steel rim was removed from the pattern to further expedite production.
